COEX 3D
Lipstick Pink PLA+Silk
Lipstick Pink PLA+Silk
SKU:CX03-1560-18-1KG
6 in stock
Couldn't load pickup availability
Create Stunning 3D Prints with Lipstick Pink PLA+Silk Filament
PLA+Silk gives a glossy shine to anything you print with it. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for showpieces and decorative models.
Coex 3D PLA+Silk is made with Virgin NatureWorks USA Ingeo resin, a high-quality colorant, and our secretive additive. All of Coex's filament is made in our production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. We provide filament that gives excellent-looking and strong prints.
Coex 3D recommends the following print settings when printing with our PLA. Settings will vary depending on your specific printing setup.
- Hotend Temperature: 215 °C - 235 °C
-
Important! This temperature range may seem hotter than you're used to for other PLA+Silk filaments. Using 100% virgin resin causes our PLA+Silk to require slightly higher printing temperatures.
- Heated Bed Temperature: 40 °C - 60 °C
- Note: A heated bed is not a strict requirement when printing PLA+Silk, but using one is recommended.
- Recommended Build Surfaces/Adhesives
- Glass Build Surface
- PEI Build Surface
- Magigoo
- Painter's Tape
- Glue Stick
- Cooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA+Silk.
- Drying: PLA+Silk filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion/inconsistent extrusion or excess stringing. You may also hear a "popping" sound coming from the hotend during printing. We recommend drying our PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.
Tolerance: At Coex 3D, we use multi axis laser measuring heads to ensure a tolerance of ±.03mm.
Quality: All Coex 3D printer filament is manufactured in our Green Bay, WI production facility. This allows us to ensure consistent quality for every spool through control of every aspect of the manufacturing process.
Packaging: Every spool of Coex 3D filament is thoroughly dried in our industrial dryer before being sealed. Spools are sealed with desiccant in a 4mil thick vacuum bag.
Tested: Coex 3D doesn't just sell filament, we use it on a daily basis. Our 50+ 3D printers are constantly running with our filament. We rely on our quality as much as our customers do.
Share
Perfect
UV reactive and just adorbz. i love this material. everything i make with it gets compliments. its the bees knees
I printed several articulated figures with the silk filaments and have found them easy to print and with a fine luster that catches the light. I didn’t need to dry my filament but maybe I’m lucky. It prints great on my Bambu X1 Carbon with a spool ring adapter. I chose to create a custom filament based on the suggestions on the product page and had great results. Further, for best shine, I printed outer, top, and bottom layers at 40mm/s with the 0.4mm nozzle. It doesn’t add much to longer prints since I can leave inner and infill layers at the higher speeds.
I’ll be buying more filament when I run out of this stuff.
Subscribe to our emails
Subscribe and get 15% off your first order.
Be the first to know about new collections and exclusive offers.