White ABS Prime is ABS (acrylonitrile butadiene styrene) for parts that take heat and impact: end-use tools, moving parts and parts under high mechanical stress. ABS Prime is an engineering-grade ABS made from a higher-grade base resin, so finished prints are stronger than with our standard ABS. Manufacturers also use ABS in rapid prototyping to test a design's impact resistance and durability.
Key properties
- Stiff, impact-resistant and heat-resistant
- Holds structural integrity and detail
Printing notes
- Requires an enclosed 3D printer
- More technical to print than PLA or PETG, so it can be harder for new users
Specs
- Material: ABS Prime
- Tolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)
- Other spool sizes available by request: contact us.
- Extruded, quality controlled and shipped from one plant in Green Bay, WI.
COEX 3D Filament Slicer Profiles
Download TDS (PDF)
Download SDS (PDF)
Download Yellow Card (PDF)
CX09 ABS Prime Technical Data Sheet
ABS Prime 3D Printer Filament
Acrylonitrile butadiene styrene (ABS) · Product code CX09 · 1.75 mm and 2.85 mm
Base resin: Acrylonitrile butadiene styrene (ABS)
Typical values for the base resin. Printed parts vary with print settings, orientation and moisture content.
Physical properties
| Property | Standard | Unit | Typical value |
|---|---|---|---|
| Density / specific gravity, 23 °C | ASTM D792 | g/cm³ | 1.05 |
| Melt mass-flow rate (MFR), 220 °C / 10.0 kg | ASTM D1238 | g/10 min | 22 |
| Molding shrinkage, flow, 23 °C, 3.20 mm | ASTM D955 | % | 0.40 to 0.70 |
| Rockwell hardness, R scale, 23 °C | ASTM D785 | 110 | |
| UL 94 flame rating, 1.5 mm | UL 94 | HB | |
| UL 94 flame rating, 3.0 mm | UL 94 | HB |
Mechanical properties
| Property | Standard | Unit | Typical value |
|---|---|---|---|
| Tensile strength at yield, 23 °C, 3.20 mm, 50 mm/min | ASTM D638 | MPa (psi) | 49.0 (7,110) |
| Tensile elongation at break, 23 °C, 3.20 mm, 50 mm/min | ASTM D638 | % | > 10 |
| Tensile modulus, 23 °C, 3.20 mm, 50 mm/min | ASTM D638 | MPa (psi) | 2,350 (341,000) |
| Tensile elongation at yield, 23 °C, 3.20 mm, 50 mm/min | ASTM D638 | % | > 5.0 |
| Flexural modulus, 23 °C, 3.20 mm, 15 mm/min | ASTM D790 | MPa (psi) | 2,550 (370,000) |
| Flexural strength, 23 °C, 3.20 mm, 15 mm/min | ASTM D790 | MPa (psi) | 78.0 (11,300) |
| Notched Izod impact, 23 °C, 6.40 mm | ASTM D256 | J/m (ft·lb/in) | 220 (4.12) |
Thermal properties
| Property | Standard | Unit | Typical value |
|---|---|---|---|
| Deflection temperature under load, 1.8 MPa (264 psi), unannealed, 6.40 mm | ASTM D648 | °C (°F) | 85.0 (185) |
| Vicat softening temperature (Rate A, 50 °C/h, 50 N) | ASTM D1525 | °C (°F) | 92.0 (198) |
Filament specifications
| Diameter | Nominal | Minimum | Maximum | Tolerance |
|---|---|---|---|---|
| 1.75 mm | 1.75 mm (0.0689 in) | 1.72 mm (0.0677 in) | 1.78 mm (0.0701 in) | ±0.03 mm (±0.0012 in) |
| 2.85 mm | 2.85 mm (0.1122 in) | 2.79 mm (0.1098 in) | 2.91 mm (0.1146 in) | ±0.06 mm (±0.0024 in) |
Recommended print settings
| Nozzle temperature | 245–265°C |
| Bed temperature | 90–110°C |
| Enclosure | An enclosure is required |
| Part cooling fan | 0–30% (off for the first layer) |
| Drying | Dry an opened spool at 80°C for 4–6 hours |
| Storage | Keep filament dry: store it sealed, and dry it again only after the spool has been exposed to air |
| Bed adhesion | use WELD3D, ABS slurry or Kapton tape |
www.coex3d.com · COEX LLC, 1228 Elizabeth St, Green Bay, WI 54302, USA · (920) 757-1055
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data should not be used to establish specification limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.
CX09 ABS Prime Safety Data Sheet
ABS Prime 3D Printer Filament
Acrylonitrile butadiene styrene (ABS) · Product code CX09
1. Identification
| Product identifier | ABS Prime 3D Printer Filament |
| Product code | CX09 |
| Recommended use | 3D printing (FFF/FDM) filament, thermoplastic |
| Restrictions on use | Not specified |
| Supplier | COEX LLC, 1228 Elizabeth St, Green Bay, WI 54302, USA |
| Telephone | (920) 757-1055 |
| Emergency telephone | (920) 757-1055 (business hours) |
| Website | www.coex3d.com |
2. Hazard identification
| Classification | Classification according to Regulation (EC) No 1272/2008 [CLP]: Not applicable |
| Label elements | Hazard Pictogram(s): Not applicable. Signal word: Not applicable. Hazard statement(s): Not applicable. Precautionary statement(s) (prevention, response, storage, disposal): Not applicable |
| Hazards not otherwise classified | Not available |
| Other information | Not available |
3. Composition / information on ingredients
| Chemical name | CAS No. | Weight % |
|---|---|---|
| Styrene Acrylonitrile Copolymer | 9003-56-9 | 95–100 |
| Typical stabilizer | 0–3 | |
| Typical lubricant | 0–3 |
Maker SDS withholds the identity of the 1–10 % component ("Secret").
4. First-aid measures
| Inhalation | When exposed to large amounts of steam and mist, move to fresh air. Take specific treatment if needed. |
| Eye contact | Do not rub your eyes. Immediately flush eyes with plenty of water for at least 15 minutes and call a doctor/physician. |
| Skin contact | Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash contaminated clothing thoroughly before re-using. |
| Ingestion | Please be advised by doctor whether induction of vomit is demanded or not. Rinse your mouth with water immediately. |
| Most important symptoms | Not available |
| Note to physicians | Notify medical personnel of contaminated situations and have them take appropriate protective measures. |
5. Fire-fighting measures
| Suitable extinguishing media | Suitable extinguishing media: Dry chemical, carbon dioxide, regular foam extinguishing agent, spray. Unsuitable extinguishing media: Avoid use of water jet for extinguishing |
| Special hazards | Hazardous combustion products: Not available |
| Protective equipment | Cool containers with water until well after fire is out. Keep unauthorized personnel out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. Notify your local firestation and inform the location of the fire and characteristics hazard. Wear appropriate protective equipment. Keep containers cool with water spray. Use fire fighting procedures suitable for surrounding area. |
| Further information | Dispose of fire debris and contaminated extinguishing water in accordance with official regulations. |
6. Accidental release measures
| Personal precautions | Spilled filament or pieces may cause a slipping hazard. Ensure adequate ventilation. |
| Environmental precautions | Do not flush into surface water or sanitary sewer system. Keep out of waterways. |
| Cleaning up | Pick up or sweep up and place in a suitable container for disposal. |
7. Handling and storage
| Safe handling | Wash thoroughly after handling. Avoid contact with incompatible materials. Dealing only with a well-ventilated place. Do not handle until all safety precautions have been read and understood. |
| Fire and explosion | Dust from grinding or sanding can form an explosive mixture with air. Take precautionary measures against static discharges. |
| Storage | Save in cool, dry and well ventilated place. Check regularly for leaks. Do not apply direct heat. Please pay attention to incompatibilities materials and conditions to avoid. Prevent static electricity and keep away from combustible materials or heat sources. |
| Incompatibilities | Not available |
8. Exposure controls / personal protection
| Exposure limits | European Union (EU) Commission Directive 2006/15/EC (IOELVs): Not available. DNEL/PNEC values: Not available |
| Engineering controls | Provide exhaust ventilation if dust or fumes are generated during processing. |
| Personal protection | Hand protection: Wear appropriate glove. Eye protection: Wear primary eye protection such as splash resistant safety goggles with a secondary protection face shield. Provide an emergency eye wash station and quick drench shower in the immediate work area. Respiratory protection: Respiratory protection is ranked in order from minimum to maximum. Consider warning properties before use. Dust, mist, fume-purifying respiratory protection; Air-purifying respirator with high-efficiency particulate filtering; Any respiratory protection with a electromotion fan (for dust, mist, fume-purifying); Self-contained breathing apparatus with a corpuscle filter of high efficiency. Skin protection: Wear appropriate clothing. Others: It is necessary to wear protective clothes and other protection equipment. Cover your face, head and neck. Thermal hazards: Not available |
| Hygiene | Do not eat or drink while working. Handle in accordance with good industrial hygiene and safety practice. |
9. Physical and chemical properties
| Appearance | Appearance (State): Solid (Pellets). Appearance (Color): Not available |
| Odor | Not available |
| Odor threshold | Not applicable |
| pH | Not applicable |
| Melting temperature | Melting point/Freezing point: Not available |
| Freezing point | No data available |
| Boiling point | Decomposes; not determined |
| Flash point | Not available |
| Evaporation rate | Not applicable (solid) |
| Flammability | Not available |
| Explosive limits | No data available |
| Vapor pressure / vapor density | No data available |
| Density | Specific gravity: 1.05 g/cm³ (ASTM D792, technical data sheet). Not stated in the maker SDS. |
| Solubility in water | Not available |
| Partition coefficient | No data available |
| Auto-ignition temperature | Not available |
| Decomposition temperature | Not available |
| Viscosity | Not applicable (solid) |
| Oxidizing properties | Oxidising properties: Not available |
10. Stability and reactivity
| Reactivity | Not available |
| Chemical stability | This material is stable under recommended storage and handling conditions. |
| Hazardous reactions | Hazardous Polymerization will not occur. |
| Conditions to avoid | Avoid contact with incompatible materials and condition. Avoid: Accumulation of electrostatic charges, Heating, Flames and hot surfaces |
| Incompatible materials | Not available |
| Hazardous decomposition products | May emit flammable vapour if involved in fire. |
11. Toxicological information
| Routes of exposure | Inhalation, ingestion, eye or skin contact. |
| Acute toxicity | Acute toxicity, oral: Product (ATEmix): Not available; [Secret]: LD50 > 5000 mg/kg (IUCLID). Dermal: Product (ATEmix): Not available; [Secret]: LD50 > 2000 mg/kg (IUCLID). Inhalation: Not available. |
| Inhalation | Not inhalable in the form supplied. |
| Irritation | Skin corrosion/irritation: Not available. Serious eye damage/irritation: Not available |
| Sensitization, repeated dose, mutagenicity, carcinogenicity, reproductive toxicity | Respiratory sensitization: Not available. Skin sensitization: Not available. Germ cell mutagenicity: Not available. Carcinogenicity (IARC, OSHA, ACGIH, NTP, EU CLP): Not available. Reproductive toxicity: Not available. Specific target organ toxicity (single exposure): Not available. Specific target organ toxicity (repeated exposure): Not available. Aspiration hazard: Not available |
| Aspiration hazard | None expected. |
12. Ecological information
| Aquatic toxicity | Fish: [2-Propenenitrile polymer with 1,3-butadiene and ethenylbenzene]: LC50 11.5 mg/l 96 hr Pimephales promelas (ECOTOX); [Secret]: LC50 >1.5 mg/l 96 hr Oryzias latipes (OECD TG 203, GLP, NITE). Invertebrate: [Secret]: LC50 >1.2 mg/l 48 hr Daphnia magna (OECD TG 202, GLP, NITE). Algae: [Secret]: ErC50 >1.6 mg/l 48 hr Scenedesmus subspicatus (EbC50 > 1.6 mg/l 72 hr) (OECD TG 201, GLP, NITE). Mobility in soil: Not available. PBT and vPvB assessment: Not available. Other adverse effects: Not available |
| Persistence and degradability | Persistence: Not available. Degradability: Not available |
| Bioaccumulation | Bioaccumulation: Not available. Biodegradability: [Secret]: Biodegradability = 15 (%) 28 day (IUCLID) |
13. Disposal considerations
| Product | Dispose of in accordance with local, state and federal regulations. Check for recycling options. Do not release into the environment. |
| Packaging | Empty spools and packaging can be recycled if not contaminated. |
14. Transport information
| US DOT, IMDG, IATA/ICAO | UN No. (ADR/RID/ADN, IMDG, ICAO): Not applicable. UN proper shipping name: Not applicable. Transport hazard class(es): Not applicable. Packing group: Not applicable. Environmental hazards: Not available / Not applicable. Special precautions for user: Local transport follows in accordance with Dangerous goods Safety Management Law. Package and transport follow in accordance with Department of Transportation (DOT) and other regulatory agency requirements. Transport in bulk (MARPOL 73/78, IBC): Not applicable |
15. Regulatory information
| U.S. TSCA | No data available |
| SARA 313 | No data available |
16. Other information
| NFPA hazard codes | No data available |
| HMIS III rating | No data available |
| Issue date / revision | 10-27-2026 · Revision 2.0, supersedes Revision 1.0 (02-04-21). Rewritten in the 16-section OSHA format. |
| Prepared by | COEX LLC |
This data is based on the current state of our information and experience.
www.coex3d.com
Disclaimer: The safety data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data describes our product in terms of safety requirements. The data provided is not applicable as a warranty of product properties. It is the responsibility of the recipient to observe the existing legal regulations for the use of this product.
CX09 ABS Prime Yellow Card
Yellow Card Sheet: CX09 ABS PRIME 3D PRINTING FILAMENT
YELLOW CARD Rev 1.0
Flammability
| Flame Rating | Value | Test Method |
|---|---|---|
| 1.5 mm, ALL | HB | UL 94 |
| 3.0 mm, ALL | HB | UL 94 |
| 3.0 mm, ALL | HB40 | IEC 60695-11-10, -20 |
| 1.5 mm, ALL | HB75 | IEC 60695-11-10, -20 |
Electrical
| Property | Value | Test Method |
|---|---|---|
| Hot-wire Ignition (HWI) | ||
| 1.5 mm | PLC 3 | UL 746A |
| 3.0 mm | PLC 3 | |
| High Amp Arc Ignition (HAI) | ||
| 1.5 mm | PLC 0 | UL 746A |
| 3.0 mm | PLC 1 | |
| Comparative Tracking Index (CTI) | PLC 0 | UL 746A |
| Dielectric Strength | 27 kV/mm | UL 746A |
| High Voltage Arc Tracking Rate (HVTR) | PLC 2 | UL 746A |
| Volume Resistivity | 1.0E+15 ohm-cm | ASTM D257, IEC60093 |
| Arc Resistance | PLC 6 | ASTM D495 |
Thermal
| Property | Value | Test Method |
|---|---|---|
| RTI Elec | ||
| 1.5 mm | 95.0 °C | UL 746B |
| 3.0 mm | 100.0 °C | |
| RTI Imp | ||
| 1.5 mm | 95.0 °C | UL 746B |
| 3.0 mm | 100.0 °C | |
| RTI Str | ||
| 1.5 mm | 95.0 °C | UL 746B |
| 3.0 mm | 100.0 °C | |
| Dimensional Change | 0.0% | ASTM D1042, ISO 2796 |
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.
| Spools | Discount |
|---|---|
| 6+ | 5% off |
| 12+ | 10% off |
| 24+ | 15% off |