The Brewers Pack has four 1 kg spools of 1.75 mm Standard PLA in blue and yellow for Milwaukee baseball fans: Cobalt Blue, Taxicab Yellow, White and Black. Use it for game-day prints like keychains, coasters, desk pieces and multicolor display models, with White and Black for lettering, outlines and bases.
All four spools are COEX 3D Standard PLA, made in our Green Bay, Wisconsin facility from virgin NatureWorks Ingeo 4043D resin (colorant only, no fillers) and held to ±0.03 mm diameter.
Recommended print settings
- Hotend: 215–235°C. That may be hotter than you're used to for PLA, because our virgin resin needs slightly higher printing temperatures.
- Bed: 40–60°C
- Build surfaces and adhesives: glass, PEI, WELD3D Bed Adhesion Spray, painter's tape or glue stick.
Specs
- Material: Standard PLA, NatureWorks Ingeo 4043D
- Contents: four 1 kg spools of 1.75 mm PLA (Cobalt Blue, Taxicab Yellow, White, Black)
- Tolerance: ±0.03 mm (1.75 mm)
- Vacuum-sealed with desiccant
- Backed by our defect guarantee: we replace or refund defective filament.
- Extruded, quality controlled and shipped from one plant in Green Bay, WI.
- Slicer profile: the COEX PLA profile for 1.75mm filament is built into OrcaSlicer 2.3.2 and later. In Filament Selection, choose vendor COEX 3D, then COEX PLA.
Print settings · Slicer profiles · Technical data sheet · Safety data sheet