Naturligt ABS
Naturligt ABS
Før musen over billedet for at zoome ind Klik på billedet for at zoome
Naturligt ABSNaturligt ABS

Naturligt ABS

Naturligt ABS

ABS filament er en termoplastisk 3d printer filament ABS, som står for Acrylonitril Butadiene Styrene . Den former sig let ved opvarmning og sætter sig jævnt, når den er afkølet. ABS-filament bruges af en række fremstillingsindustrier til dele, der kræver strukturel integritet og detaljer, og er ideel til "slitage"-projekter. Det bruges almindeligvis i miljøer med hurtig prototyping og additiv fremstilling for at teste produktets slagfasthed og holdbarhed. Det er også populært blandt 3D-printere, der bruger 3D-print i deres hjem eller på en lokal producentmesse. Denne 3D-printerfilament fås i 1,75 og 2,85 MM i diameter og kommer i 500 g, 5 lbs, 15 lbs og 1 kg.
I modsætning til PLA- og PETG-filament er ABS en smule mere teknisk og kan være mere udfordrende for nye 3D-printere og kræver brug af en lukket 3D-printer. ABS er et stift 3D-printmateriale, og det er slag- og varmebestandigt. Almindelige anvendelser for ABS omfatter slutbrugsværktøjer, bevægelige dele og dele, der skal modstå høj mekanisk belastning.

Teknisk printvejledning - COEX ABS

1. Bemærkninger om materiale

  • Hold filamentet tørt - opbevar det korrekt og tør det før brug
  • Om nødvendigt tørres det ved 75°C i 3 timer eller mere
  • Inddækning (kabinet) er nødvendig
  • Brug en Z-offset, der er en smule højere end ved PLA (+0,05 mm)
  • Aktivér "Undgå at krydse perimetre" for at reducere strengdannelse (stringing)
  • Overvej at bruge indstillingen "Tør af under tilbagetrækning" (Wipe while retract)
  • Aktivér "Sæt hastigheden ned for små perimetre"
  • Print ydre vægge langsommere for bedre kvalitet
  • Brug en minimum lagtid på 30 sekunder til små dele
  • Overvej at bruge "Ekstra prime-mængde" efter tilbagetrækning

2. Temperaturindstillinger

Printpladetemperatur: 80-100°C

  • Vask printpladen ofte for god vedhæftning - Brug opvaskemiddel og skyl grundigt for at fjerne fedt
  • Brug vedhæftningsprodukter hvis nødvendigt (limstift, WELD3D)
  • Brug brim til høje eller store print
  • Hold omgivelsestemperaturen stabil

Ekstrudertemperatur: 245-265°C

3. Grundlæggende parametre

Dyse Laghøjde Linjebredde Volumetrisk hastighed Temperatur
0,4 mm 0,2 mm 0,42 mm 14,0 mm³/s 250°C
0,6 mm 0,3 mm 0,62 mm 31,5 mm³/s 255°C
0,8 mm 0,4 mm 0,82 mm 56,0 mm³/s 260°C
1,0 mm 0,5 mm 1,02 mm 87,5 mm³/s 265°C


4. Hastighedsindstillinger

0,4 mm dyse (Volumetrisk hastighed: 14,0 mm³/s)

Linjetype Procentdel Hastighed
Ydre perimeter 50% 83,33 mm/s
Indre perimetre 75% 125,00 mm/s
Infill 100% 166,67 mm/s
Top/bund 60% 100,00 mm/s
Første lag 30% 50,00 mm/s


0,6 mm dyse (Volumetrisk hastighed: 31,5 mm³/s)

Linjetype Procentdel Hastighed
Ydre perimeter 50% 84,68 mm/s
Indre perimetre 75% 127,02 mm/s
Infill 100% 169,35 mm/s
Top/bund 60% 101,61 mm/s
Første lag 30% 50,81 mm/s


0,8 mm dyse (Volumetrisk hastighed: 56,0 mm³/s)

Linjetype Procentdel Hastighed
Ydre perimeter 50% 85,37 mm/s
Indre perimetre 75% 128,05 mm/s
Infill 100% 170,73 mm/s
Top/bund 60% 102,44 mm/s
Første lag 30% 51,22 mm/s


1,0 mm dyse (Volumetrisk hastighed: 87,5 mm³/s)

Linjetype Procentdel Hastighed
Ydre perimeter 50% 85,78 mm/s
Indre perimetre 75% 128,68 mm/s
Infill 100% 171,57 mm/s
Top/bund 60% 102,94 mm/s
Første lag 30% 51,47 mm/s


4. Indstillinger for tilbagetrækning (Retraction)

VIGTIGT: Indstil kørehastighed (travel speed) til det maksimale, din maskine tillader (200-500 mm/s). Hurtigere bevægelser reducerer tiden for filamentudsivning, hvilket minimerer strengdannelse.

Dyse Afstand Hastighed Z-Hop
0,4 mm 1,0-1,5 mm 40 mm/s 0,2 mm
0,6 mm 1,0-1,5 mm 40 mm/s 0,2 mm
0,8 mm 1,0-1,5 mm 40 mm/s 0,2 mm
1,0 mm 1,0-1,5 mm 40 mm/s 0,2 mm

6. Køleindstillinger

Kølekonfiguration:

    • Første lag: 0% (blæser slukket)
    • Generel printning: 100% blæserhastighed
    • Broer og udhæng: 100% blæserhastighed
    • Lag < 15 sekunder: 100% blæserhastighed

7. Fejlfindingsvejledning

Problem Løsning
Uregelmæssig ekstrudering

1. Tør filamentet

2. Tjek ekstruderen

3. Reducér hastigheden
Dårlig vedhæftning

1. Tør filamentet

2. Brug vedhæftningsmiddel

3. Justér første lag
Strengdannelse (stringing)

1. Tør filamentet

2. Justér tilbagetrækning

3. Øg kørehastighed

4. Tjek temperatur

BEMÆRK VENLIGST: Disse printparametre er indledende anbefalinger baseret på vores erfaring. De kan have brug for justering afhængigt af din specifikke 3D-printer, miljømæssige forhold og geometrien af den del, du printer. Brug disse indstillinger som et udgangspunkt og finjustér dem efter dine specifikke behov.

Coex 3D Filament Slicer Profiles

CX01 ABS Technical Data Sheet

Technical Data Sheet: CX01 ABS SERIES 3D PRINTING FILAMENT

TDS Rev 2.0

BASE RESIN: CHIMEI General ABS POLYLAC Ultra-High Impact Strength

Physical Properties

PropertyStandardUnitTypical Value
Specific Gravity - DensityASTM D792g/cm³1.03
Melt Density @220°C, 10KGASTM D1133g/10 min13
UL Flammability Class. @1.5mmUL 94N/A94HB

Mechanical Properties

PropertyStandardUnitTypical Value
Tensile Yield StrengthASTM D638MPa40
Tensile ModulusASTM D638MPa2350
Tensile ElongationASTM D638%35
Flexural StressISO 178MPa58
Notched Izod ImpactASTM D256J/m285
Shrinkage Rate < 1%ASTM D955mm/mm0.40 - 0.70%

Thermal Properties

PropertyStandardUnitTypical Value
Glass Transition Temperature (Tg)DSC°C105
Heat Distortion Temp @ 0.45MPaASTM D648°C85
Decomposition TemperatureASTM 3418°C300

SPECIFICATIONS

Filament Size:1.75mm(in)2.85mm(in)
MIN Diameter:1.72mm0.0677 in2.79mm0.1098 in
MAX Diameter:1.78mm0.0701 in2.91mm0.1146 in
Tolerance+/- .03mm+/- 0.0012 in+/- .06mm+/- 0.0024 in

CERTIFICATIONS

ROHS compliant to (2011/65/EU), 2003/11/EC, TCO'07, Blue Angel and SONY Std. (SS-00259)

NSF/ANSI/CAN 61 Drinking Water System Components

UL/C-UL Certified Yellow Card E56070

Printed Specimen Conditions

Printer:Open Source FDM/FFF
Nozzle:0.4mm
Layer Height:0.25mm
Infill:100%, +/-45°
Extrusion Temp:240°C
Bed Temp:90°C
Specimen Orientation:XY Flat
Unannealed

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.

Download TDS (PDF)

CX01 ABS Safety Data Sheet

Material Safety Data Sheet: CX01 ABS SERIES 3D PRINTING FILAMENT

MSDS Rev 1.0

BASE RESIN: CHIMEI General ABS POLYLAC Ultra-High Impact Strength

1. Identification of the substance/preparation and of the company

1.1 Trade name:Coex ABS 3D printer filament
1.2 Use of the product:3D printer filament, thermoplastic polymer
1.3 Supplier:Coex
660 Corporate WAY
Pulaski, WI 54162
Phone: (920) 757-1055

2. Hazards identification

2.1 Classification:Combustible Dust
2.2 Special advice on hazards:May form combustible dust concentrations in air. While this product may not be a combustible dust as sold, further processing or handling may form combustible dust concentrations in air.

3. Composition / information on ingredients

3.1 Chemical characteristics:

CAS #Hazardous ComponentsConcentration
9003-54-7Styrene Acrylonitrile Copolymer<=95 %
1333-86-4Carbon black<=5.0 %

4. First-aid measures

4.1 On skin contact:In case of contact with molten polymer immediately cool the skin with cold water. Medical aid may be required to remove adhering material and for treatment of burns.
4.2 After inhalation:Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
4.3 On ingestion:If swallowed, wash out mouth with water provided person is conscious. Call a physician.
4.4 On eyes contact:In case of contact, immediately flush eyes with copious amounts of water for at least (15) minutes.

5. Fire-fighting measures

5.1 Suitable fire extinguishing media:Water spray and foam. Water is the best extinguishing medium.
5.2 Special exposure hazards:Emits toxic fumes under fire conditions. Approved positive pressure demand breathing apparatus (SCBA) and protective clothing should be used for all fires.
5.3 Special protective equipment:Self-contained breathing apparatus
5.4 Remark:Carbon dioxide and carbon monoxide generated when the material burns. Combustible Dust may form during material transfer. Estimated Dust Explosion Class = ST2; Kst estimated (bar.m/s): >200 -

6. Accidental release measures

6.1 Personal precautions:Use suitable protective clothing. Avoid eye contact and inhalation of dusts. Keep ignition sources away.
6.2 Methods for cleaning up:Vacuum or sweep up material and place into a suitable disposal container.

7. Handling and storage

7.1 Handling:Avoid contact with molten polymer. Avoid generation of dust and electrostatic charge.
7.2 Storage:Protect against moisture. Store cool and keep packaging closed when not in use. Avoid sources of ignition.

8. Exposure controls/ personal protection

8.1 Technical safety measures:Use with adequate ventilation. Minimize dust generation and accumulation as combustible dust mixtures may be formed.
8.2 Personal safety equipment:Use adequate safety equipment, e.g. protective clothing, eye protection glasses, heat protection gloves. In case of dust formation wear mask with particle filter.
8.3 Work hygiene:No eating or drinking during working. Avoid contact of hot material with the skin. Avoid breathing dust and vapors.

9. Physical and chemical properties

9.1 Form:Spool
9.2 Color:Various
9.3 Odor:Almost Odorless
9.4 Melting Temperature:250 °C
9.5 Oxidizing properties:Not self-igniting / flammable
9.6 Explosions limits:Class = ST2
9.7 Density:1.27 g/cm³
9.8 Solubility in water:Insoluble

10. Stability and reactivity

10.1 Stability:The product is stable at recommended storage conditions.
10.2 Conditions to be avoided:Stable under recommended conditions of storage and handling.
10.3 Substances to be avoided:No special recommendations.
10.4 Hazardous decomposition products:Processing fumes evolved at recommended processing conditions may include trace levels of low molecular weight hydrocarbon fragments, carbon dioxide, carbon monoxide and Irritating fumes and gases.

11. Toxicological information

11.1 Local irritation:No data available.
11.2 Other remarks:No data available.

12. Ecological information

12.1 Ecological info:This product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.
12.2 Biological degradation:No data available.
12.3 Bioaccumulation:This product will not readily bioaccumulate due to its insolubility in water.

13. Disposal considerations

13.1 Product:Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in (261) CFR Parts (261.3). Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification. RCRA P-Series: None listed. RCRA U-Series: None listed.
13.2 Uncleaned packaging:Packaging material has to be emptied completely and disposed in accordance with the regulations. Packaging can be recycled if not contaminated.

14. Transport information

14.1 Transport regulations:Not classified as hazardous under transport regulations DOT, ICAO/IATA, IMDG/GGVSee, ICAO/IATA

15. Regulatory information

15.1 EPA regulations: This material meets the EPA 'Hazard Categories' defined for SARA Title III Sections 311/312 as indicated:

  • Acute (immediate) Health Hazard: No
  • Chronic (delayed) Health Hazard: No
  • Fire Hazard: Yes
  • Sudden Release of Pressure Hazard: No
  • Reactive Hazard: No

16. Other information

This data is based on the current state of our information and experience. This safety data sheet describes our product in terms of safety requirements. Preceding data is not applicable as a warranty of product properties. It is the responsibility of the recipient to observe the existing legal regulations for the use of this product.

Disclaimer: The safety data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data describes our product in terms of safety requirements. The data provided is not applicable as a warranty of product properties. It is the responsibility of the recipient to observe the existing legal regulations for the use of this product.

Download SDS (PDF)

Naturligt ABS

Spar $2.00
SKU: CX01-0100-18-1KG
Ingen anmeldelser
Diameter: 1,75 mm
Vægt: 1 kg
Pris:
$28.00 $30.00
Lager:
Lager: 30

Du vil måske også kunne lide

Senest viste