Spring til indhold
Midnatsblå ASA Prime
Midnight Blue ASA Prime
COEX 3D ASA Prime er det ultimative valg for skabere, der kræver holdbarhed, præcision og UV-stabilitet i deres udendørs print. Vores førsteklasses ASA-filament (Acrylonitril Styren Acrylat) er designet til topydelse og kombinerer brugervenligheden fra PLA med robustheden fra ABS, uden nogen af ulemperne ved de to.
Uovertruffen udendørs ydeevne
ASA Prime er specifikt formuleret til at modstå de hårdeste miljømæssige forhold. I modsætning til standardfilamenter, der falmer, revner eller deformeres ved sollys, bevarer vores UV-stabiliserede formel farvens intensitet og den strukturelle integritet i årevis, hvilket gør den perfekt til:
- Udendørs skiltning og displays
- Automotive komponenter
- Haveredskaber og inventar
- Dele til droner og fjernstyrede køretøjer
- Marine applikationer
Overlegen printkvalitet
- Konsekvent ekstrudering: Præcisionsudviklet diametertolerance (±0,03 mm) sikrer jævn, problemfri udskrivning
- Minimal vridning: Avanceret formulering reducerer svind og vridning under afkøling
- Fremragende lagvedhæftning: Skaber solide, vandtætte dele med enestående strukturel styrke
- Glat finish: Producerer professionelt udseende print med en førsteklasses overflade
Vores nøje udvalgte palet tilbyder alt fra subtile neutrale nuancer til iøjnefaldende klare farver—alt sammen formuleret til at bevare deres rige farve, selv efter mange års solpåvirkning.
Hvorfor vælge COEX 3D ASA Prime?
- Kvalitetsgaranti: Hver batch testes for konsistens og ydeevne
- Support: Coex 3D er her for at hjælpe dig med at få succes
- Værdi: Førsteklasses kvalitet til en konkurrencedygtig pris
Perfekt til:
Professionelle, hobbyfolk og "makers", der har brug for funktionelle dele, der ser flotte ud og holder længere. Når dit projekt kræver pålidelighed i udendørs miljøer, leverer COEX 3D ASA Prime resultater, du kan stole på.
CX04 ASA Prime Technical Data Sheet
Technical Data Sheet: CX04 ASA PRIME SERIES 3D PRINTING FILAMENT
TDS Rev 2.0
BASE RESIN: LG Chem L1912 UV resistant General Purpose Material
Physical Properties
| Property | Standard | Unit | Typical Value |
|---|---|---|---|
| Specific Gravity - Density | ASTM D792 | g/cm³ | 1.07 |
| Melt Density @220°C, 10KG | ASTM D1133 | g/10 min | 12 |
| UL Flammability Class. @1.5mm | UL 94 | N/A | 94HB |
Mechanical Properties
| Property | Standard | Unit | Typical Value |
|---|---|---|---|
| Tensile Yield Strength | ASTM D638 | MPa | 49 |
| Tensile Modulus | ASTM D638 | MPa | 2160 |
| Tensile Elongation | ASTM D638 | % | 25 |
| Flexural Strength | ASTM D790 | MPa | 79 |
| Notched Izod Impact | ASTM D256 | J/m | 175 |
| Shrinkage Rate < 1% | ASTM D955 | mm/mm | 0.40 - 0.70% |
Thermal Properties
| Property | Standard | Unit | Typical Value |
|---|---|---|---|
| Glass Transition Temperature (Tg) | DSC | °C | 95 |
| Heat Distortion Temp @ 0.45MPa | ASTM D648 | °C | 86 |
| Decomposition Temperature | ASTM 3418 | °C | 300 |
SPECIFICATIONS
| Filament Size: | 1.75mm | (in) | 2.85mm | (in) |
|---|---|---|---|---|
| MIN Diameter: | 1.72mm | 0.0677 in | 2.79mm | 0.1098 in |
| MAX Diameter: | 1.78mm | 0.0701 in | 2.91mm | 0.1146 in |
| Tolerance | +/- .03mm | +/- 0.0012 in | +/- .06mm | +/- 0.0024 in |
CERTIFICATIONS
UL Yellow Card LI912
Printed Specimen Conditions
| Printer: | Open Source FDM/FFF |
| Nozzle: | 0.4mm |
| Layer Height: | 0.25mm |
| Infill: | 100%, +/-45° |
| Extrusion Temp: | 240°C |
| Bed Temp: | 90°C |
| Specimen Orientation: | XY Flat |
| Unannealed | |
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.
CX04 ASA Prime Safety Data Sheet
Material Safety Data Sheet: CX04 ASA Prime SERIES 3D PRINTING FILAMENT
MSDS Rev 1.0
BASE RESIN: ASA LI912
1. Identification of the substance/preparation and of the company
1228 Elizabeth ST
Green Bay, WI 54302
Phone: (920) 757-1055
2. Hazards identification
3. Composition / information on ingredients
3.1 Chemical characteristics:
| CAS # | Hazardous Components | Concentration |
|---|---|---|
| 26299-47-8 | 2-Propenoic acid butyl ester polymer with ethenylbenzene and 2- propenenitrile | 90 ~ 99.9% |
| 2082-79-3 | 3,5-Bis(1,1-dimethylethyl)-4-hydroxybenzene- propanoic acid octadecyl ester | < 1% |
| 52829-07-9 | Decanedioic acid bis(2,2,6,6-tetramethyl-4-piperidinyl) ester | < 1% |
4. First-aid measures
5. Fire-fighting measures
6. Accidental release measures
7. Handling and storage
8. Exposure controls/ personal protection
9. Physical and chemical properties
10. Stability and reactivity
11. Toxicological information
12. Ecological information
13. Disposal considerations
14. Transport information
15. Regulatory information
15.1 EPA regulations: This material meets the EPA 'Hazard Categories' defined for SARA Title III Sections 311/312 as indicated:
- Acute (immediate) Health Hazard: No
- Chronic (delayed) Health Hazard: No
- Fire Hazard: Yes
- Sudden Release of Pressure Hazard: No
- Reactive Hazard: No
16. Other information
This data is based on the current state of our information and experience. This safety data sheet describes our product in terms of safety requirements. Preceding data is not applicable as a warranty of product properties. It is the responsibility of the recipient to observe the existing legal regulations for the use of this product.
Disclaimer: The safety data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data describes our product in terms of safety requirements. The data provided is not applicable as a warranty of product properties. It is the responsibility of the recipient to observe the existing legal regulations for the use of this product.
CX04 ASA Prime Yellow Card
Yellow Card Sheet: CX04 ASA PRIME 3D PRINTING FILAMENT
YELLOW CARD Rev 1.0
Flammability
| Flame Rating | Value | Test Method |
|---|---|---|
| 1.0 mm, ALL | HB | UL 94 |
| 3.0 mm, ALL | HB | UL 94 |
| 6.0 mm, ALL | HB | UL 94 |
| 3.0 mm, ALL | HB40 | IEC 60695-11-10, -20 |
| 6.0 mm, ALL | HB40 | IEC 60695-11-10, -20 |
| 1.5 mm, ALL | HB75 | IEC 60695-11-10, -20 |
Electrical
| Property | Value | Test Method |
|---|---|---|
| Hot-wire Ignition (HWI) | ||
| 1.5 mm | PLC 4 | UL 746 |
| 3.0 mm | PLC 3 | |
| 6.0 mm | PLC 2 | |
| High Amp Arc Ignition (HAI) | ||
| 1.5 mm | PLC 0 | UL 746 |
| 3.0 mm | PLC 0 | |
| 6.0 mm | PLC 0 | |
| Comparative Tracking Index (CTI) | PLC 2 | UL 746 |
| Dielectric Strength | 27 kV/mm | ASTM 746 |
| High Voltage Arc Tracking Rate (HVTR) | PLC 1 | UL 746 |
| Volume Resistivity | 1.0E+15 ohms-cm | ASTM D257, IEC 60093 |
| Arc Resistance | PLC 6 | ASTM D495 |
Thermal
| Property | Value | Test Method |
|---|---|---|
| RTI Elec | ||
| 1.0 mm | 50.0 °C | UL 746 |
| 3.0 mm | 50.0 °C | |
| 6.0 mm | 50.0 °C | |
| RTI Imp | ||
| 1.5 mm | 50.0 °C | UL 746 |
| 3.0 mm | 50.0 °C | |
| 6.0 mm | 50.0 °C | |
| RTI Str | ||
| 1.5 mm | 50.0 °C | UL 746 |
| 3.0 mm | 50.0 °C | |
| 6.0 mm | 50.0 °C | |
| Dimensional Stability | 0.0% | ASTM D1042, ISO 2796 |
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.