Lemon Yellow ASA Prime.
Lemon Yellow ASA Prime.
Lemon Yellow ASA Prime.
Før musen over billedet for at zoome ind Klik på billedet for at zoome
Lemon Yellow ASA Prime.Lemon Yellow ASA Prime.Lemon Yellow ASA Prime.

Citrongul ASA Prime

Citron-gul ASA Prime

COEX 3D ASA Prime er det ultimative valg for skabere, der kræver holdbarhed, præcision og UV-stabilitet i deres udendørs print. Vores førsteklasses ASA-filament (acrylonitril-styren-acrylat) er udviklet til topydelse og kombinerer nemheden ved at printe med PLA med robustheden fra ABS, uden ulemperne ved nogen af delene.

Uovertruffen udendørs ydeevne

ASA Prime er specifikt formuleret til at modstå de hårdeste miljømæssige forhold. I modsætning til standardfilamenter, der falmer, revner eller deformeres ved solpåvirkning, bevarer vores UV-stabiliserede formel farveintensitet og strukturel integritet i årevis, hvilket gør det perfekt til:

  • Udendørs skiltning og displays
  • Automotive komponenter
  • Haveredskaber og inventar
  • Reservedele til droner og fjernstyrede køretøjer
  • Marineapplikationer

Overlegen printkvalitet

  • Konsekvent ekstrudering: Præcisionsteknisk diametertolerance (±0,03 mm) sikrer jævn, problemfri printning
  • Minimal warping: Avanceret formel reducerer svind og vridning under afkøling
  • Fremragende laghæftning: Skaber solide, vandtætte dele med enestående strukturel styrke
  • Glat finish: Producerer professionelt udseende print med en overflade i høj kvalitet

Vores nøje udvalgte palet tilbyder alt fra diskrete neutrale farver til iøjnefaldende klare nuancer—alle formuleret til at bevare deres rige farve selv efter årevis med solpåvirkning.

Hvorfor vælge COEX 3D ASA Prime?

  • Kvalitetsgaranti: Hver batch testes for konsistens og ydeevne
  • Support: Coex 3D er her for at hjælpe dig med at få succes
  • Værdi: Førsteklasses kvalitet til en konkurrencedygtig pris

Perfekt til:

Professionelle, hobbyfolk og makers, der har brug for funktionelle dele, der både ser godt ud og holder længe. Når dit projekt kræver pålidelighed i udendørs miljøer, leverer COEX 3D ASA Prime resultater, du kan stole på.

Coex's ASA Prime er fremstillet med råharpiks, udelukkende farvestoffer i høj kvalitet og indeholder ingen fyldstoffer.

Alt Coex 3D's filament fremstilles på vores produktionsanlæg i Wisconsin, USA

Teknisk printvejledning - COEX ASA Prime

1. Materialenoter

  • Hold filamentet tørt - opbevar korrekt og tør det før brug
  • Tør om nødvendigt ved 75°C i 3 timer eller mere
  • Kabinet (enclosure) er nødvendigt
  • Brug en Z-offset, der er en smule højere end PLA (+0,05 mm)
  • Aktivér "Undgå at krydse perimetre" for at reducere strengdannelse (stringing)
  • Overvej at bruge muligheden "Wipe while retract"
  • Aktivér "Sæt hastigheden ned for små perimetre"
  • Print ydre vægge langsommere for bedre kvalitet
  • Brug en minimum lagtid på 30 sekunder for små dele
  • Overvej at bruge "Ekstra prime-mængde" efter tilbagetrækning (retraction)

2. Temperaturindstillinger

Pladetemperatur: 80-100°C

  • Vask pladen ofte for god vedhæftning - Brug opvaskemiddel og skyl grundigt for at fjerne fedt
  • Brug produkter til pladevedhæftning om nødvendigt (limstift, WELD3D)
  • Brug "brim" til høje eller store print
  • Hold den omgivende temperatur stabil

Ekstrudertemperatur: 245-265°C

3. Grundlæggende parametre

Dyse Laghøjde Linjebredde Volumetrisk hastighed Temperatur
0,4 mm 0,2 mm 0,42 mm 14,0 mm³/s 250°C
0,6 mm 0,3 mm 0,62 mm 31,5 mm³/s 255°C
0,8 mm 0,4 mm 0,82 mm 56,0 mm³/s 260°C
1,0 mm 0,5 mm 1,02 mm 87,5 mm³/s 265°C


4. Hastighedsindstillinger

0,4 mm dyse (Volumetrisk hastighed: 14,0 mm³/s)

Linjetype Procentdel Hastighed
Ydre perimeter 50% 83,33 mm/s
Indre perimetre 75% 125,00 mm/s
Infill 100% 166,67 mm/s
Top/Bund 60% 100,00 mm/s
Første lag 30% 50,00 mm/s


0,6 mm dyse (Volumetrisk hastighed: 31,5 mm³/s)

Linjetype Procentdel Hastighed
Ydre perimeter 50% 84,68 mm/s
Indre perimetre 75% 127,02 mm/s
Infill 100% 169,35 mm/s
Top/Bund 60% 101,61 mm/s
Første lag 30% 50,81 mm/s


0,8 mm dyse (Volumetrisk hastighed: 56,0 mm³/s)

Linjetype Procentdel Hastighed
Ydre perimeter 50% 85,37 mm/s
Indre perimetre 75% 128,05 mm/s
Infill 100% 170,73 mm/s
Top/Bund 60% 102,44 mm/s
Første lag 30% 51,22 mm/s


1,0 mm dyse (Volumetrisk hastighed: 87,5 mm³/s)

Linjetype Procentdel Hastighed
Ydre perimeter 50% 85,78 mm/s
Indre perimetre 75% 128,68 mm/s
Infill 100% 171,57 mm/s
Top/Bund 60% 102,94 mm/s
Første lag 30% 51,47 mm/s


5. Indstillinger for tilbagetrækning (Retraction)

VIGTIGT: Sæt rejsehastigheden (travel speed) til det maksimale, din maskine tillader (200-500 mm/s). Hurtigere bevægelser reducerer tiden, hvor filamentet kan flyde ud, hvilket minimerer strengdannelse.

Dyse Afstand Hastighed Z-Hop
0,4 mm 1,0-1,5 mm 40 mm/s 0,2 mm
0,6 mm 1,0-1,5 mm 40 mm/s 0,2 mm
0,8 mm 1,0-1,5 mm 40 mm/s 0,2 mm
1,0 mm 1,0-1,5 mm 40 mm/s 0,2 mm

6. Køleindstillinger

Konfiguration af køling:

    • Første lag: 0% (blæser slukket)
    • Generel printning: 100% blæserhastighed
    • Broer og udhæng: 100% blæserhastighed
    • Lag < 15 sekunder: 100% blæserhastighed

7. Fejlfindingsguide

Problem Løsning
Uregelmæssig ekstrudering

1. Tør filamentet

2. Kontrollér ekstruderen

3. Reducér hastigheden
Dårlig vedhæftning

1. Tør filamentet

2. Brug adhæsionsmiddel

3. Justér det første lag
Strengdannelse (stringing)

1. Tør filamentet

2. Justér tilbagetrækning

3. Øg rejsehastigheden

4. Kontrollér temperaturen

BEMÆRK: Disse printparametre er indledende anbefalinger baseret på vores erfaring. De kan kræve justering afhængigt af din specifikke 3D-printer, miljømæssige forhold og geometrien af den del, du printer. Brug disse indstillinger som udgangspunkt og finjustér dem efter dine specifikke behov.

Coex 3D Filament Slicer Profiles

CX04 ASA Prime Technical Data Sheet

Technical Data Sheet: CX04 ASA PRIME SERIES 3D PRINTING FILAMENT

TDS Rev 2.0

BASE RESIN: LG Chem L1912 UV resistant General Purpose Material

Physical Properties

PropertyStandardUnitTypical Value
Specific Gravity - DensityASTM D792g/cm³1.07
Melt Density @220°C, 10KGASTM D1133g/10 min12
UL Flammability Class. @1.5mmUL 94N/A94HB

Mechanical Properties

PropertyStandardUnitTypical Value
Tensile Yield StrengthASTM D638MPa49
Tensile ModulusASTM D638MPa2160
Tensile ElongationASTM D638%25
Flexural StrengthASTM D790MPa79
Notched Izod ImpactASTM D256J/m175
Shrinkage Rate < 1%ASTM D955mm/mm0.40 - 0.70%

Thermal Properties

PropertyStandardUnitTypical Value
Glass Transition Temperature (Tg)DSC°C95
Heat Distortion Temp @ 0.45MPaASTM D648°C86
Decomposition TemperatureASTM 3418°C300

SPECIFICATIONS

Filament Size:1.75mm(in)2.85mm(in)
MIN Diameter:1.72mm0.0677 in2.79mm0.1098 in
MAX Diameter:1.78mm0.0701 in2.91mm0.1146 in
Tolerance+/- .03mm+/- 0.0012 in+/- .06mm+/- 0.0024 in

CERTIFICATIONS

UL Yellow Card LI912

Printed Specimen Conditions

Printer:Open Source FDM/FFF
Nozzle:0.4mm
Layer Height:0.25mm
Infill:100%, +/-45°
Extrusion Temp:240°C
Bed Temp:90°C
Specimen Orientation:XY Flat
Unannealed

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.

Download TDS (PDF)

CX04 ASA Prime Safety Data Sheet

Material Safety Data Sheet: CX04 ASA Prime SERIES 3D PRINTING FILAMENT

MSDS Rev 1.0

BASE RESIN: ASA LI912

1. Identification of the substance/preparation and of the company

1.1 Trade name:Coex ASA Prime 3D printer filament
1.2 Use of the product:3D printer filament, thermoplastic polymer
1.3 Supplier:Coex
1228 Elizabeth ST
Green Bay, WI 54302
Phone: (920) 757-1055

2. Hazards identification

2.1 Classification:Not applicable

3. Composition / information on ingredients

3.1 Chemical characteristics:

CAS #Hazardous ComponentsConcentration
26299-47-82-Propenoic acid butyl ester polymer with ethenylbenzene and 2- propenenitrile90 ~ 99.9%
2082-79-33,5-Bis(1,1-dimethylethyl)-4-hydroxybenzene- propanoic acid octadecyl ester< 1%
52829-07-9Decanedioic acid bis(2,2,6,6-tetramethyl-4-piperidinyl) ester< 1%

4. First-aid measures

4.1 On skin contact:In case of contact with molten polymer immediately cool the skin with cold water. Medical aid may be required to remove adhering material and for treatment of burns.
4.2 After inhalation:Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
4.3 On ingestion:If swallowed, wash out mouth with water provided person is conscious. Call a physician.
4.4 On eye contact:In case of contact, immediately flush eyes with copious amounts of water for at least (15) minutes.

5. Fire-fighting measures

5.1 Suitable fire extinguishing media:Dry chemical, carbon dioxide, regular foam extinguishing agent, spray.
5.2 Unsuitable extinguishing media:Avoid the use of water jets for extinguishing.
5.3 Special exposure hazards:Not available
5.4 Special protective equipment:Self-contained breathing apparatus
5.5 Remark:In case of conflagration, use an automatic fire sprinkler. A major fire may require withdrawal, allowing the object itself to burn. Avoid inhalation of materials or combustion by-products. Do not approach the tank surrounded by fire until it is extinguished. Keep containers cool with water spray. Use firefighting procedures suitable for the surrounding area.

6. Accidental release measures

6.1 Personal precautions:Use suitable protective clothing. Avoid eye contact and inhalation of dusts. Keep ignition sources away.
6.2 Methods for cleaning up:Vacuum or sweep up material and place into a suitable disposal container.

7. Handling and storage

7.1 Handling:Avoid contact with molten polymer. Avoid generation of dust and electrostatic charge.
7.2 Storage:Protect against moisture. Store cool and keep packaging closed when not in use. Avoid sources of ignition.

8. Exposure controls/ personal protection

8.1 Technical safety measures:Use with adequate ventilation. Minimize dust generation and accumulation as combustible dust mixtures may be formed.
8.2 Personal safety equipment:Use adequate safety equipment, e.g. protective clothing, eye protection glasses, heat protection gloves. In case of dust formation wear mask with particle filter.
8.3 Work hygiene:No eating or drinking during working. Avoid contact of hot material with the skin. Avoid breathing dust and vapors.

9. Physical and chemical properties

9.1 Form:Spool
9.2 Color:Various
9.3 Odor:Almost Odorless
9.4 Melting Temperature:250 °C
9.5 Oxidizing properties:Not self-igniting / flammable
9.6 Explosions limits:Not Available
9.7 Density:1.07 g/cm³
9.8 Solubility in water:Insoluble

10. Stability and reactivity

10.1 Stability:The product is stable at recommended storage conditions.
10.2 Conditions to be avoided:Stable under recommended conditions of storage and handling.
10.3 Substances to be avoided:No special recommendations.
10.4 Hazardous decomposition products:May emit flammable vapor if involved in fire.

11. Toxicological information

11.1 Local irritation:No data available.
11.2 Other remarks:No data available.

12. Ecological information

12.1 Ecological info:This product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.
12.2 Biological degradation:No data available.
12.3 Bioaccumulation:This product will not readily bioaccumulate due to its insolubility in water.

13. Disposal considerations

13.1 Product:Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in (261) CFR Parts (261.3). Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification. RCRA P-Series: None listed. RCRA U-Series: None listed.
13.2 Uncleaned packaging:Packaging material has to be emptied completely and disposed in accordance with the regulations. Packaging can be recycled if not contaminated.

14. Transport information

14.1 Transport regulations:Not classified as hazardous under transport regulations DOT, ICAO/IATA, IMDG/GGVSee, ICAO/IATA

15. Regulatory information

15.1 EPA regulations: This material meets the EPA 'Hazard Categories' defined for SARA Title III Sections 311/312 as indicated:

  • Acute (immediate) Health Hazard: No
  • Chronic (delayed) Health Hazard: No
  • Fire Hazard: Yes
  • Sudden Release of Pressure Hazard: No
  • Reactive Hazard: No

16. Other information

This data is based on the current state of our information and experience. This safety data sheet describes our product in terms of safety requirements. Preceding data is not applicable as a warranty of product properties. It is the responsibility of the recipient to observe the existing legal regulations for the use of this product.

Disclaimer: The safety data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data describes our product in terms of safety requirements. The data provided is not applicable as a warranty of product properties. It is the responsibility of the recipient to observe the existing legal regulations for the use of this product.

Download SDS (PDF)

CX04 ASA Prime Yellow Card

Yellow Card Sheet: CX04 ASA PRIME 3D PRINTING FILAMENT

YELLOW CARD Rev 1.0

Flammability

Flame RatingValueTest Method
1.0 mm, ALLHBUL 94
3.0 mm, ALLHBUL 94
6.0 mm, ALLHBUL 94
3.0 mm, ALLHB40IEC 60695-11-10, -20
6.0 mm, ALLHB40IEC 60695-11-10, -20
1.5 mm, ALLHB75IEC 60695-11-10, -20

Electrical

PropertyValueTest Method
Hot-wire Ignition (HWI)
1.5 mmPLC 4UL 746
3.0 mmPLC 3
6.0 mmPLC 2
High Amp Arc Ignition (HAI)
1.5 mmPLC 0UL 746
3.0 mmPLC 0
6.0 mmPLC 0
Comparative Tracking Index (CTI)PLC 2UL 746
Dielectric Strength27 kV/mmASTM 746
High Voltage Arc Tracking Rate (HVTR)PLC 1UL 746
Volume Resistivity1.0E+15 ohms-cmASTM D257, IEC 60093
Arc ResistancePLC 6ASTM D495

Thermal

PropertyValueTest Method
RTI Elec
1.0 mm50.0 °CUL 746
3.0 mm50.0 °C
6.0 mm50.0 °C
RTI Imp
1.5 mm50.0 °CUL 746
3.0 mm50.0 °C
6.0 mm50.0 °C
RTI Str
1.5 mm50.0 °CUL 746
3.0 mm50.0 °C
6.0 mm50.0 °C
Dimensional Stability0.0%ASTM D1042, ISO 2796

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.

Download Yellow Card (PDF)

Citrongul ASA Prime

Spar $4.00
SKU: CX04-3500-18-1KG
Ingen anmeldelser
Diameter: 1,75 mm
Vægt: 1 kg
Pris:
$30.00 $34.00
Lager:
Lager: 15

Du vil måske også kunne lide

Senest viste