Spring til indhold
Udskriftsparametre
Sort CoexNylex™ ufyldt nylon
Sort CoexNylex™ ufyldt nylon
Ufyldt nylon, sort farve. CoexNylex™ kombinerer fremragende varmebestandighed med kemikalie- og hydrolysebestandighed
CoexNylex™ Nylon er fremstillet af nylon af højeste kvalitet udviklet af Dupont. Coex Nylex kan udskrives på de fleste 3D-printere for at fremstille ekstremt holdbare og stærke dele.
.
Anbefalede udskriftsindstillinger:
- Udskriv på en solvent-renset overflade opvarmet til 85°C-110°C
- Anbefalet udskriftstemperatur 245°C-295°C
- Det anbefales ikke at bruge køleblæser til emnet. Det kan forårsage lagdelaminering.
- Start tilbagetrækning ved 1-1,5 mm ved 10-30 mm/sek. for direkte drevne ekstrudere og 2,5 mm ved 30-35 mm/sek. for indirekte drevne ekstrudere
*Graf venligst stillet til rådighed af Ryan Laffin; Nylex kundetestdeltager
Coex 3D Filament Slicer Profiles
CX21 CoexNylex Unfilled Technical Data Sheet
Technical Data Sheet: CX21 COEX-NYLEX UNFILLED SERIES 3D PRINTING FILAMENT
TDS Rev 1.0
BASE RESIN: DuPont Zytel
Physical Properties
| Property | Standard | Unit | Typical Value |
|---|---|---|---|
| Specific Gravity - Density | ISO 1183 | g/cm³ | 1.09 |
| Melting Temperature, 10°C/min | ISO 11357-1/-3 | °C | 198 |
Mechanical Properties
| Property | Standard | Unit | Typical Value |
|---|---|---|---|
| Tensile Stress @ Break | ISO 527 Type 1BA | MPa | 40 |
| Tensile Modulus | ISO 527 Type 1A | MPa | 23 |
| Nominal Strain @ Break | ISO 527 Type 1BA | % | 15 |
| Tensile Stress @ 50% | ISO 527 Type 1BA | MPa | 55 |
| Notched Izod Impact | ISO 180/1A | kJ/m² | 3 |
Thermal Properties
| Property | Standard | Unit | Typical Value |
|---|---|---|---|
| Drying Temperature @ 12 hours | - | °C | 85 |
SPECIFICATIONS
| Filament Size: | 1.75mm | (in) | 2.85mm | (in) |
|---|---|---|---|---|
| MIN Diameter: | 1.72mm | 0.0677 in | 2.79mm | 0.1098 in |
| MAX Diameter: | 1.78mm | 0.0701 in | 2.91mm | 0.1146 in |
| Tolerance | +/- .03mm | +/- 0.0012 in | +/- .06mm | +/- 0.0024 in |
ADVANTAGES
- Heat Resistant, Chemical Resistant, Strong, Durable
- Lightweight and incredibly strong material to make durable, functional parts.
Printed Specimen Conditions
| Printer: | Open Source FDM/FFF |
| Nozzle: | 0.4mm |
| Layer Height: | 0.25mm |
| Infill: | 100%, +/-45° |
| Extrusion Temp: | 245 - 295°C |
| Bed Temp: | 80 - 110°C |
| Specimen Orientation: | XY Flat and Vertical |
| Printing Speed | 60mm/sec.. |
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient's sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.