Før musen over billedet for at zoome ind Klik på billedet for at zoome

Sort CoexNylex™ ufyldt nylon

SKU: CX23-0300-18-1KG

3 anmeldelser

Pris:

$85.00

Vægt: 1 kg

Lagerstatus: 0, Vi producerer snart flere

Antal:

Add 5 more spools to save 5%

Print settings TDS SDS Slicer profiles

Del dette produkt

Sort CoexNylex™ ufyldt nylon

Ufyldt nylon, sort i farven. CoexNylex™ kombinerer enestående varmebestandighed med kemikalie- og hydrolyseresistens

CoexNylex™ Nylon er fremstillet af nylon af højeste kvalitet udviklet af Dupont. Coex Nylex kan printes på de fleste 3D-printere for at producere ekstremt holdbare og stærke dele.
.
Anbefalede udskriftsindstillinger:

Print på en opløsningsrenset overflade opvarmet til 85°C-110°C
Anbefalet printtemperatur 245°C-295°C
Del køleventilator anbefales ikke. Det kan forårsage lagdelaminering.
Start tilbagetrækning ved 1-1,5 mm ved 10-30 mm/sek. for direkte drevne ekstrudere og 2,5 mm ved 30-35 mm/sek. for indirekte drevne ekstrudere

CoexNylex Ufyldt TDS

Resultater af CoexNylex-forsøg

*Graf udlånt af Ryan Laffin; Nylex kundetestdeltager

Bulk spool pricing - mix & match any filament
Spools	Discount
6+	5% off
12+	10% off
24+	15% off

This is great stuff

I absolutely love this filament. It prints extremely well, and is reasonably tough when annealed, and has extremely good dimentional accuracy.

My only issue is that it's only availabile in 10% CF. I'm desperate for this formula to be a available in 20-25% CF. Please guys, please! The issue is when it gets slight warm, it starts to flex.

Hi Scott, thank you for your fantastic review! We're thrilled to hear you love the Black CoexNylex™ PA6-CF filament and appreciate your feedback on the reinforcement levels. The trouble with going much higher on the CF load is that you will begin to lose layer adhesion if the load is too high.

Older Model CoexNylex Glass Fill

Hey, I have been "scared" to print the GF of CoexNylex filament for years due to the shear affect to the nozzles in question. But! Since I got the Ruby nozzle that recently became available for my K1C, I decided to try it out. I also got some hardened steel nozzles for testing the CF addition to the Coex Brand.

I am learning and getting some good success with this older model filament. I bought 2.2 lbs. of this filament years ago and started to print on it tonight, i.e. probably a four to five year old filament.

Anyway, I am printing a standard 95mm * 95mm * 6.5mm block with two holes. The holes are 15mm in diameter and are 15mm away from each side near where they are located. If you guys bring it back, please require me to know about it. My K1C from Creality has a PA (Nylon) preset now and since they have updated their GUI and K1C firmware from years past, printing on it has been a gleaming success with ASA-CF, ABS, PETG-CF, and now the daunting task of Nylon.

Do not get me wrong. I am very glad to see the Nylex from COEX 3D still being around but with Carbon Fiber instead of Glass Fill.

Seth

P.S. I will think about this specific CF Nylex from COEX 3D next time I purchase filament. Oh! I am using an epoxy-resin build plate and basically moving at 185mm/sec^2. So, I am not super fast at printing this filament yet but the 0.6mm nozzle does not hurt...

My timelapse failed and so I do not have anything to show but the end result...enjoy.

Seems to be Excellent PA6-CF

First time using this and it appears more uniform and smoother than other pa6-cf I’ve used. I don’t know how it compares strength wise but it prints beautifully. It did seem to hang up a bit more, (perhaps more friction) in my ptfe tubing when feeding from a filament drier but I just removed the tubing and it fed perfectly. I was going to buy again but out of stock unfortunately. This appears to be very good filament.

Thanks for the great review David, we'll be making more just as soon as we can. Should be back on the shelf by this weekend.

Sort CoexNylex™ ufyldt nylon

Sort CoexNylex™ ufyldt nylon

Sort CoexNylex™ ufyldt nylon

Customer Reviews

Reviews in Other Languages

Du vil måske også kunne lide

Senest viste