Transition Mystery Color ASA PrimeFilament

Our transition color ASA Prime filament is the same high quality ASA Prime filament that our customers trust but in "mystery colors." These varying colors are the result of our changeovers from one of our standard color to another during production of our filament and cannot be reproduced. While supplies last. Items are not returnable or refundable due to color.

Note: These are not a rainbow filament.  The color change in each spool will vary and be very gradual.

*This product is limited to availability as we make changeovers. If you cannot add it to your cart, we are sorry, but we are out of stock.

Recommended Print Settings

Coex 3D recommends the following print settings when printing with our ASA Prime. Settings will vary depending on your specific printing setup.

• Hotend Temperature: 245 °C - 265 °C (High Speed: 255 °C - 275 °C)
  
  • Important! This temperature range may seem hotter than you're used to for other ASA filaments. Using 100% virgin resin causes our ASA to require slightly higher printing temperatures.
    
• Heated Bed Temperature: 80 °C - 100 °C
  
• Recommended Build Surfaces/Adhesives
  • Glass Build Surface
  • PEI Build Surface
  • Magigoo
  • Painter's Tape
  • Glue Stick
  • ABS slurry
• Cooling Fan: Recommended. 
• Enclosure: Recommended to prevent warping 
• Drying: ASA Prime filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion/inconsistent extrusion or excess stringing. You may also hear a "popping" sound coming from the hotend during printing. We recommend drying our ASA Prime at 65 °C for at least 3 hours if it has been exposed to excess humidity.