Natural CoexNylex™ Unfilled Nylon

Coex Natural CoexNylex™ Unfilled Nylon is manufactured from the highest quality nylon developed by Dupont. Coex Nylex is able to be printed on most 3D printers to produce extremely durable and strong parts.

Recommended print settings:

• Print on a solvent-cleaned surface heated to 85°C-110°C
• Recommended print temperature 245°C-295°C
• Part cooling fan is not recommended. It may cause layer delamination.
• Start retraction at 1-1.5 mm at 10-30 mm/sec for direct-drive extruders and 2.5 mm at 30-35 mm/sec for indirect-drive extruders

CoexNylex Unfilled TDS

CoexNylex Trial Results

*Graph courtesy of Ryan Laffin; Nylex Customer Test Participant