COEX 3D
Glow in the Dark Green PLA
Coex 3D Glow in the Dark Green PLA - The most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models. We provide filament that gives excellent-looking and strong prints.
Coex's PLA is made with Virgin NatureWorks Ingeo 4043D resin, high-quality colorant only, and no fillers.
All of Coex 3D's filament is made in our production facility located in Wisconsin, USA.
As good or better than most competitors + or prime.
Recommended Print Settings
- Hotend Temperature: 215 °C - 235 °C
-
Important! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes our PLA to require slightly higher printing temperatures.
- Bed Temperature: 0 °C - 60 °C
- Recommended Build Surfaces/Adhesives: Glass, PEI Build Surface, Magigoo, Painter's Tape, Glue Stick
IMPORTANT! The glow-in-the-dark additives used in this filament are mildly abrasive. Coex 3D recommends printing this filament using a hardened nozzle, as a brass nozzle will quickly wear out when printing this material.