Skip to product information
1 of 2

coex3d

BLTouch V3.1 - Automatic Bed Leveling Probe

BLTouch V3.1 - Automatic Bed Leveling Probe

Part Number: RX06-0002-BL-3.1

Regular price $37.99 USD
Regular price Sale price $37.99 USD
Sale Sold out
Shipping calculated at checkout.

32 in stock

Summary

BLTouch is a type of semiconductor hall sensor and is an electronic component for 3D printers.

BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

Features

Main functions and controls of BLTouch are the same as usual auto bed leveling sensor, consists of RC servo and micro switch. Thus, BLTouch can be applied on almost every board.

BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.

Simple

BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.

Smart

Self-test : The push pin operate two times in a test when the power is on.

Alarm : The AI will flash the LED indicator if a problem is detected during a self-test or operation.

Wiring defect indicator : Blue and Red LED for indicating wiring defects.

High-precision

BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.

Logic Voltage Free(Open Drain Output)

3.3V / 5V logic voltage free(default).

Long stroke : ≒ 6.5mm

The stroke is up to 1.6mm longer than V2.0

BLTouch vs. other sensor

※ The data above can be varied by assembling shape and other environments.

But assembled with the low quality 3D printer, we just get the value as 0.001~0.05mm. (It was the same BLTouch) Actually, around 0.05 is also not much problem at FDM type 3D printers.

View full details