{"title":"Engineering filament","description":"\u003cp\u003eEngineering-grade filament made in Green Bay, Wisconsin: ASA, PCTG, COEXNylex nylon, HIPS, flame-retardant ABS and ESD PETG.\u003c\/p\u003e","products":[{"product_id":"natural-coexnylex-unfilled-nylon","title":"Natural COEXNylex™ Unfilled Nylon","description":"\u003cp\u003eNatural COEXNylex Unfilled Nylon is made from nylon resin. It prints on most 3D printers and makes durable, strong parts.\u003c\/p\u003e\u003ch3\u003eRecommended print settings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHotend: 245–295°C\u003c\/li\u003e\n\u003cli\u003eBed: 85–110°C, on a solvent-cleaned surface\u003c\/li\u003e\n\u003cli\u003ePart cooling fan not recommended. It can cause layer delamination.\u003c\/li\u003e\n\u003cli\u003eRetraction: start at 1–1.5 mm at 10–30 mm\/s for direct-drive extruders, or 2.5 mm at 30–35 mm\/s for indirect-drive extruders\u003c\/li\u003e\n\u003cli\u003eShips pre-dried. If it pops or strings, dry at 80 °C for 8–12 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: COEXNylex unfilled nylon\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/filament-parameters\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_SDS_CX21-COEXNYLEX_UNFILLED_10-26-2026_REV_1.0.pdf?v=1793039474\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41276034711735,"sku":"CX21-0100-18-1KG","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41279441469623,"sku":"CX21-0100-30-1KG","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Natural-CoexNylexTM-Unfilled-Nylon-White-COEX-3D-212561846.jpg?v=1767374815"},{"product_id":"black-coexnylex-unfilled-nylon","title":"Black COEXNylex™ Unfilled Nylon","description":"\u003cp\u003eBlack COEXNylex Unfilled Nylon is made from nylon resin. It prints on most 3D printers and makes durable, strong parts.\u003c\/p\u003e\u003ch3\u003eRecommended print settings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHotend: 245–295°C\u003c\/li\u003e\n\u003cli\u003eBed: 85–110°C, on a solvent-cleaned surface\u003c\/li\u003e\n\u003cli\u003ePart cooling fan not recommended. It can cause layer delamination.\u003c\/li\u003e\n\u003cli\u003eRetraction: start at 1–1.5 mm at 10–30 mm\/s for direct-drive extruders, or 2.5 mm at 30–35 mm\/s for indirect-drive extruders\u003c\/li\u003e\n\u003cli\u003eShips pre-dried. If it pops or strings, dry at 80 °C for 8–12 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: COEXNylex unfilled nylon\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/filament-parameters\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_SDS_CX21-COEXNYLEX_UNFILLED_10-26-2026_REV_1.0.pdf?v=1793039474\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41276035629239,"sku":"CX21-0300-18-1KG","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41279435997367,"sku":"CX21-0300-30-1KG","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Black-CoexNylexTM-PA6-Carbon-COEX-3D-210059191.jpg?v=1767374824"},{"product_id":"flame-retardant-black-abs","title":"Flame Retardant Black ABS","description":"\u003cp\u003eFlame Retardant ABS is made from a UL94 V-0 rated ABS base resin, for parts that need to self-extinguish, such as electrical enclosures and housings near heat sources.\u003c\/p\u003e\u003ch3\u003eUL94 flame rating of the base resin\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003cth\u003eRating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003ctd\u003eV-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.0mm\u003c\/td\u003e\n\u003ctd\u003eV-0, 5VB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003ctd\u003eV-0, 5VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.0mm\u003c\/td\u003e\n\u003ctd\u003eV-0, 5VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese are the UL94 ratings of the base resin used to make COEX 3D Flame Retardant ABS filament. They are not ratings of a finished printed part. How a printed part performs depends on its geometry, wall thickness and print settings, so test parts for your application. The UL yellow card is available on request.\u003c\/p\u003e\u003ch3\u003eVentilation is required\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse direct ventilation. Vent outdoors, or through HEPA and carbon filtration.\u003c\/li\u003e\n\u003cli\u003eNever let Flame Retardant ABS cool in the nozzle. Remove it while the nozzle is still hot, then purge with standard ABS.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eBacked by our defect guarantee: we replace or refund defective filament.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_TDS_CX16-FR_ABS_10-27-2026_REV_3.0.pdf?v=1793132916\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_YELLOW_CARD_CX16-ABS_FLAME_RETARDANT_02-01-24_REV_1.0.pdf?v=1729874254\" target=\"_blank\" rel=\"noopener\"\u003eUL yellow card\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-parameters\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eBuying for a government or defense program? See our \u003ca href=\"\/pages\/government-vendor\"\u003eGovernment Vendor page\u003c\/a\u003e.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41279438028983,"sku":"CX16-0300-18-1KG","price":52.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41279437963447,"sku":"CX16-0300-18-500G","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41279437996215,"sku":"CX16-0300-18-5LB","price":115.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41279438061751,"sku":"CX16-0300-30-1KG","price":52.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":51832442323308,"sku":"CX16-0300-30-5LB","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/FR_ABS_spool.png?v=1793195479"},{"product_id":"natural-hips","title":"Natural HIPS","description":"\u003cp\u003eNatural HIPS (high impact polystyrene) is a dissolvable filament, often used as support material. Limonene solution removes it, so supports come off without scraping or cutting that could damage your print.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: HIPS\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-hips\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41279442026679,"sku":"CX06-0100-18-1KG","price":29.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41279442059447,"sku":"CX06-0100-18-500G","price":19.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41385090547895,"sku":"CX06-0100-30-1KG","price":29.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":41385091465399,"sku":"CX06-0100-30-5LB","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Spool_HIPs_White.png?v=1762438800"},{"product_id":"white-asa-prime","title":"White ASA Prime","description":"\u003cp\u003eWhite ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41868041453751,"sku":"CX04-0200-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41868041420983,"sku":"CX04-0200-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41868041486519,"sku":"CX04-0200-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41908207911095,"sku":"CX04-0200-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":52635501756780,"sku":"CX04-0200-30-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/whiteASAspool.png?v=1786567365"},{"product_id":"black-asa","title":"Black ASA Prime","description":"\u003cp\u003eBlack ASA Prime is for outdoor parts that have to stay black, like automotive trim. ASA Prime is the outdoor-rated alternative to ABS. It prints much like ABS, but it's UV-stabilized, so parts keep their color and strength in direct sun. Black is one of our two best-selling ASA colors, alongside \u003ca href=\"\/products\/aqua-blue-asa-prime\"\u003eAqua Blue\u003c\/a\u003e. It's made from LG Chem L1912 ASA resin, colorant only, no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV-stabilized: resists fading, cracking and deforming in sunlight\u003c\/li\u003e\n\u003cli\u003eOutdoor signage · automotive parts · garden fixtures · drone and RC parts · marine hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow warping, and strong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eASA absorbs moisture. Store it sealed and dry it if print quality drops.\u003c\/li\u003e\n\u003cli\u003eVentilation helps with the smell but isn't required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: LG Chem L1912 ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eVacuum-sealed with desiccant\u003c\/li\u003e\n\u003cli\u003eBacked by our defect guarantee: we replace or refund defective filament.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003cli\u003eSlicer profile: the COEX ASA PRIME profile for 1.75mm filament is built into OrcaSlicer 2.3.2 and later. In Filament Selection, choose vendor COEX 3D, then COEX ASA PRIME.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_TDS_CX04-ASA_PRIME_10-27-2026_REV_3.0.pdf?v=1793132916\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41868041584823,"sku":"CX04-0300-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41868041552055,"sku":"CX04-0300-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41868041617591,"sku":"CX04-0300-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41930123739319,"sku":"CX04-0300-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":42018044870839,"sku":"CX04-0300-30-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":42904653103287,"sku":"CX04-0300-18-15LB","price":204.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 8lb","offer_id":43209389736119,"sku":"CX04-0300-18-8LB","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/BlackASAspool.png?v=1786567364"},{"product_id":"salsa-red-asa-prime","title":"Salsa Red ASA Prime","description":"\u003cp\u003eSalsa Red ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41868052725943,"sku":"CX04-1400-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41868052693175,"sku":"CX04-1400-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41868052758711,"sku":"CX04-1400-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":42177875968183,"sku":"CX04-1400-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":42177876230327,"sku":"CX04-1400-30-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/SALSAREDASAspool.png?v=1786567365"},{"product_id":"inferno-orange-asa-prime","title":"Inferno Orange ASA Prime","description":"\u003cp\u003eInferno Orange ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41868052955319,"sku":"CX04-2700-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41868052922551,"sku":"CX04-2700-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41868052988087,"sku":"CX04-2700-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41988498129079,"sku":"CX04-2700-18-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/INFERNOORANGEASAspool.png?v=1786567365"},{"product_id":"natural-asa-prime","title":"Natural ASA Prime","description":"\u003cp\u003eNatural ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41868054397111,"sku":"CX04-0100-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41868054364343,"sku":"CX04-0100-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41868054429879,"sku":"CX04-0100-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41930176856247,"sku":"CX04-0100-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":41930176921783,"sku":"CX04-0100-30-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/NATURALASAspool.png?v=1786567351"},{"product_id":"lemon-yellow-asa-prime","title":"Lemon Yellow ASA Prime","description":"\u003cp\u003eLemon Yellow ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41868058755255,"sku":"CX04-3500-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41868058722487,"sku":"CX04-3500-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41868058788023,"sku":"CX04-3500-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":42018021310647,"sku":"CX04-3500-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":42018026520759,"sku":"CX04-3500-30-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Spool_ASA_Lemon.png?v=1762439202"},{"product_id":"cobalt-blue-asa-prime","title":"Cobalt Blue ASA Prime","description":"\u003cp\u003eCobalt Blue ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41868059214007,"sku":"CX04-5500-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41868059181239,"sku":"CX04-5500-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41868059246775,"sku":"CX04-5500-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41930176626871,"sku":"CX04-5500-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":41930176659639,"sku":"CX04-5500-30-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COBALTBLUEASAspool.png?v=1786567346"},{"product_id":"stone-gray-asa-prime","title":"Stone Gray ASA Prime","description":"\u003cp\u003eStone Gray ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41868060360887,"sku":"CX04-7200-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41868060328119,"sku":"CX04-7200-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41885226205367,"sku":"CX04-7200-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41868060393655,"sku":"CX04-7200-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":41885226238135,"sku":"CX04-7200-30-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/StoneGrayASAspool.png?v=1786567318"},{"product_id":"metallic-silver-asa-prime","title":"Metallic Silver ASA Prime","description":"\u003cp\u003eMetallic Silver ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41885220962487,"sku":"CX04-7500-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41885220995255,"sku":"CX04-7500-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41885221028023,"sku":"CX04-7500-30-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/METALLICSILVERASAspool.png?v=1786567512"},{"product_id":"aqua-blue-asa-prime","title":"Aqua Blue ASA Prime","description":"\u003cp\u003eASA Prime is the outdoor-rated alternative to ABS. It prints much like ABS, but it's UV-stabilized, so parts keep their color and strength in direct sun. Aqua Blue is one of our two best-selling ASA colors. It's made from LG Chem L1912 ASA resin, colorant only, no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV-stabilized: resists fading, cracking and deforming in sunlight\u003c\/li\u003e\n\u003cli\u003eOutdoor signage · automotive parts · garden fixtures · drone and RC parts · marine hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow warping, and strong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eASA absorbs moisture. Store it sealed and dry it if print quality drops.\u003c\/li\u003e\n\u003cli\u003eVentilation helps with the smell but isn't required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: LG Chem L1912 ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eVacuum-sealed with desiccant\u003c\/li\u003e\n\u003cli\u003eBacked by our defect guarantee: we replace or refund defective filament.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003cli\u003eSlicer profile: the COEX ASA PRIME profile for 1.75mm filament is built into OrcaSlicer 2.3.2 and later. In Filament Selection, choose vendor COEX 3D, then COEX ASA PRIME.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_TDS_CX04-ASA_PRIME_10-27-2026_REV_3.0.pdf?v=1793132916\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41885222207671,"sku":"CX04-5200-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41885222240439,"sku":"CX04-5200-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41885222895799,"sku":"CX04-5200-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41885222273207,"sku":"CX04-5200-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":42018036023479,"sku":"CX04-5200-30-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 8lb","offer_id":43143288586423,"sku":"CX04-5200-18-8LB","price":109.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":51844888559980,"sku":"CX04-5200-18-15LB","price":204.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/AQUABLUEASAspool.png?v=1786567302"},{"product_id":"shamrock-green-asa-prime","title":"Shamrock Green ASA Prime","description":"\u003cp\u003eShamrock Green ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41885224468663,"sku":"CX04-4500-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41885224501431,"sku":"CX04-4500-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41885224534199,"sku":"CX04-4500-30-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":41930122363063,"sku":"CX04-4500-18-5LB","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":41930122887351,"sku":"CX04-4500-30-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/SHAMROCKGREENASAspool.png?v=1786567276"},{"product_id":"midnight-blue-asa-prime","title":"Midnight Blue ASA Prime","description":"\u003cp\u003eMidnight Blue ASA Prime is UV-stabilized ASA (acrylonitrile styrene acrylate) for outdoor parts, and it prints much like ABS. It's made from virgin resin with colorant only and no fillers.\u003c\/p\u003e\u003ch3\u003eBuilt for outdoors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResists fading, cracking and deforming in sunlight, and keeps its color for years\u003c\/li\u003e\n\u003cli\u003eOutdoor signage and displays · automotive components · garden fixtures and tools · drone and RC vehicle parts · marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping as it cools\u003c\/li\u003e\n\u003cli\u003eStrong layer adhesion for solid, watertight parts\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin ASA\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-asa-prime\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":41909336375479,"sku":"CX04-5900-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":41909336408247,"sku":"CX04-5900-18-500G","price":20.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":41909336441015,"sku":"CX04-5900-30-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/MIDNIGHTBLUEASAspool.png?v=1786567232"},{"product_id":"black-coexnylex™-pa6-carbon","title":"Black COEXNylex™ PA6-CF","description":"\u003cp\u003eCOEXNylex PA6-CF is PA6 nylon reinforced with 10% carbon fiber, and it's our top-selling nylon. Use it for parts that have to carry load, hold their dimensions and take heat: jigs, fixtures and manufacturing aids, robotics frames and mechanical components, automotive and aerospace prototypes, and load-bearing end-use parts. Want nylon without the fiber? See the \u003ca href=\"\/collections\/coexnylex-natural\"\u003efull COEXNylex range\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh strength-to-weight ratio and tensile strength\u003c\/li\u003e\n\u003cli\u003eDimensional stability and heat resistance for demanding engineering parts\u003c\/li\u003e\n\u003cli\u003eConsistent extrusion and strong layer adhesion despite the fiber content\u003c\/li\u003e\n\u003cli\u003eMatte black finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse a hardened steel or other wear-resistant nozzle. Carbon fiber wears brass.\u003c\/li\u003e\n\u003cli\u003eShips pre-dried, ready to print when you open it.\u003c\/li\u003e\n\u003cli\u003eNylon absorbs moisture. Reseal the spool with desiccant between prints, and dry an opened spool at 80°C for 8–12 hours before critical prints.\u003c\/li\u003e\n\u003cli\u003eNeed help dialing it in? Our engineering team can advise on settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: COEXNylex PA6 nylon with 10% carbon fiber\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eVacuum-sealed with desiccant\u003c\/li\u003e\n\u003cli\u003eBacked by our defect guarantee: we replace or refund defective filament.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003cli\u003eSlicer profile: the COEX NYLEX PA6-CF profile for 1.75mm filament is built into OrcaSlicer 2.3.2 and later. In Filament Selection, choose vendor COEX 3D, then COEX NYLEX PA6-CF.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/filament-parameters\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_TDS_CX23-COEXNYLEX_PA6CF_10-26-2026_REV_2.0.pdf?v=1793039473\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_SDS_CX23-COEXNYLEX_PA6CF_10-26-2026_REV_3.0.pdf?v=1793039473\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eBuying for a government or defense program? See our \u003ca href=\"\/pages\/government-vendor\"\u003eGovernment Vendor page\u003c\/a\u003e.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52018123407724,"sku":"CX23-0300-18-1KG","price":85.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":52386765701484,"sku":"CX23-0300-18-500G","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/PA6CF_S.webp?v=1762439435"},{"product_id":"black-pctg-prime","title":"Black PCTG Prime","description":"\u003cp\u003eBlack PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52477498687852,"sku":"CX15-0300-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":53336470028652,"sku":"CX15-0300-18-9LB","price":122.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Black_PCTG_spool_c0f72443-e995-4a5a-a287-78bb65377c70.png?v=1793197843"},{"product_id":"white-pctg-prime","title":"White PCTG Prime","description":"\u003cp\u003eWhite PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52477554852204,"sku":"CX15-0200-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/whitePCTGspool.png?v=1786565086"},{"product_id":"cobalt-blue-pctg-prime","title":"Cobalt Blue PCTG Prime","description":"\u003cp\u003eCobalt Blue PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52477567795564,"sku":"CX15-5500-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/CobaltBluePCTGspool.png?v=1786565076"},{"product_id":"stone-gray-pctg-prime","title":"Stone Gray PCTG Prime","description":"\u003cp\u003eStone Gray PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52477589750124,"sku":"CX15-7200-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":67644717072748,"sku":"CX15-7200-18-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/StoneGrayPCTGspool.png?v=1786565052"},{"product_id":"natural-pctg-prime","title":"Natural PCTG Prime","description":"\u003cp\u003eNatural PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth, high-clarity finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52514949136748,"sku":"CX15-0100-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/NaturalPCTGspool.png?v=1786565041"},{"product_id":"white-coexnylex™-unfilled-nylon","title":"White COEXNylex™ Unfilled Nylon","description":"\u003cp\u003eWhite COEXNylex Unfilled Nylon is made from nylon resin. It prints on most 3D printers and makes durable, strong parts.\u003c\/p\u003e\u003ch3\u003eRecommended print settings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHotend: 245–295°C\u003c\/li\u003e\n\u003cli\u003eBed: 85–110°C, on a solvent-cleaned surface\u003c\/li\u003e\n\u003cli\u003ePart cooling fan not recommended. It can cause layer delamination.\u003c\/li\u003e\n\u003cli\u003eRetraction: start at 1–1.5 mm at 10–30 mm\/s for direct-drive extruders, or 2.5 mm at 30–35 mm\/s for indirect-drive extruders\u003c\/li\u003e\n\u003cli\u003eShips pre-dried. If it pops or strings, dry at 80 °C for 8–12 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: COEXNylex unfilled nylon\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/filament-parameters\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_SDS_CX21-COEXNYLEX_UNFILLED_10-26-2026_REV_1.0.pdf?v=1793039474\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52725748695404,"sku":"CX21-0200-18-1KG","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Natural-CoexNylexTM-Unfilled-Nylon-White-COEX-3D-212561846.jpg?v=1767374815"},{"product_id":"stealth-gray-pctg-prime","title":"Stealth Gray PCTG Prime","description":"\u003cp\u003eStealth Gray PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52737178599788,"sku":"CX15-0350-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":53336469078380,"sku":"CX15-0350-18-9LB","price":122.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":67644787884396,"sku":"CX15-0350-18-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/StealthGrayPCTGspool.png?v=1786565019"},{"product_id":"forest-green-pctg-prime","title":"Forest Green PCTG Prime","description":"\u003cp\u003eForest Green PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52737180238188,"sku":"CX15-4900-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/ForrestGreenPCTGspool.png?v=1786564949"},{"product_id":"banana-yellow-pctg-prime","title":"Banana Yellow PCTG Prime","description":"\u003cp\u003eBanana Yellow PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":52886755082604,"sku":"CX15-3400-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/BananaYellowPCTGspool.png?v=1786564856"},{"product_id":"scarlet-red-pctg-prime","title":"Scarlet Red PCTG Prime","description":"\u003cp\u003eScarlet Red PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":53815348035948,"sku":"CX15-1500-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/ScarletRedPCTGspool.png?v=1786564855"},{"product_id":"pumpkin-orange-pctg-prime","title":"Pumpkin Orange PCTG Prime","description":"\u003cp\u003ePumpkin Orange PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":53937048846700,"sku":"CX15-2800-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/PumpkinOrangePCTGspool.png?v=1786564833"},{"product_id":"blueberry-pctg-prime","title":"Blueberry PCTG Prime","description":"\u003cp\u003eBlueberry PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":53952031850860,"sku":"CX15-5700-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/BlueberryPCTGspool.png?v=1786564647"},{"product_id":"gunmetalgray-pctg-prime","title":"Gunmetal Gray PCTG Prime","description":"\u003cp\u003eGunmetal Gray PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":54081535770988,"sku":"CX15-0400-18-1KG","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":67644663169388,"sku":"CX15-0400-18-5LB","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/GunmetalGrayPCTGspool.png?v=1786564435"},{"product_id":"black-esd-petg","title":"Black ESD PETG","description":"\u003cp\u003eBlack ESD PETG is a static dissipative 3D printing filament made by COEX 3D in Green Bay, Wisconsin. Use it to print parts that hold or touch ESD-sensitive electronics: assembly fixtures, component trays, PCB jigs and protective housings. The compound's manufacturer lists a typical surface resistance of 10\u003csup\u003e4\u003c\/sup\u003e Ω.\u003c\/p\u003e\u003cp\u003eIt's PETG compounded with carbon nanotubes, which make it static dissipative. It keeps PETG's easy printability, chemical resistance, layer adhesion and dimensional stability, and needs no heated chamber, so it prints on standard desktop setups.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eElectronics assembly: component trays, PCB fixtures and jigs, protective housings\u003c\/li\u003e\n\u003cli\u003eIndustrial tooling: conveyor guides, pick-and-place tooling, automated line components\u003c\/li\u003e\n\u003cli\u003eESD packaging: custom transport cases, enclosures and guards for sensitive devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical properties\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface resistance\u003c\/td\u003e\n\u003ctd\u003e10\u003csup\u003e4\u003c\/sup\u003e Ω\u003c\/td\u003e\n\u003ctd\u003eManufacturer's internal method\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\u003ctd\u003e1.29\u003c\/td\u003e\n\u003ctd\u003eASTM D792\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e2,000 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e52 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e12%\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e1,400 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003e62 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIzod impact, notched\u003c\/td\u003e\n\u003ctd\u003e34 J\/m\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIzod impact, unnotched\u003c\/td\u003e\n\u003ctd\u003e2,200 J\/m\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.45 MPa\u003c\/td\u003e\n\u003ctd\u003e70°C\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 1.8 MPa\u003c\/td\u003e\n\u003ctd\u003e64°C\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eTypical values for injection-molded samples, per the compound manufacturer's preliminary data sheet; not ratings of a finished printed part. How a printed part performs depends on its geometry, wall thickness and print settings, so test parts for your application.\u003c\/p\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo heated chamber needed.\u003c\/li\u003e\n\u003cli\u003eThe carbon nanotube additive is abrasive. Use a hardened steel or other wear-resistant nozzle.\u003c\/li\u003e\n\u003cli\u003ePETG bonds very strongly to glass and smooth PEI. Use a release agent such as a glue stick or WELD3D, or the print or the build plate can break when you remove it.\u003c\/li\u003e\n\u003cli\u003ePETG absorbs moisture. Store it sealed with desiccant. If you hear popping, dry it: the compound manufacturer specifies 4–6 hours at 60°C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PETG compounded with carbon nanotubes\u003c\/li\u003e\n\u003cli\u003eESD classification: static dissipative, 10\u003csup\u003e4\u003c\/sup\u003e Ω typical surface resistance\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eVacuum-sealed with desiccant\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/filament-parameters\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_TDS_CX14-ESD_PETG_10-27-2026_REV_3.0.pdf?v=1793132916\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_SDS_CX14-ESD_PETG_10-27-2026_REV_2.0.pdf?v=1793132916\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eBuying for a government or defense program? See our \u003ca href=\"\/pages\/government-vendor\"\u003eGovernment Vendor page\u003c\/a\u003e.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":54242248982892,"sku":"CX14-0300-18-1KG","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/ESD_PETG_spool.png?v=1789481627"},{"product_id":"matte-black-pctg-prime","title":"Matte Black PCTG Prime","description":"\u003cp\u003eMatte Black PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":67701403418988,"sku":"CX15-0900-18-1KG","price":42.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":67701403484524,"sku":"CX15-0900-18-5LB","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Matte_Black_PCTG_spool.png?v=1793197843"},{"product_id":"rust-orange-pctg-prime-copy","title":"Rust Orange PCTG Prime","description":"\u003cp\u003eRust Orange PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":67701509521772,"sku":"CX15-2600-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/RustOrangePETGspool.png?v=1786562641"},{"product_id":"milkshake-pink-pctg-prime-copy-1","title":"Milkshake Pink PCTG Prime","description":"\u003cp\u003eMilkshake Pink PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":67701519745388,"sku":"CX15-1100-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Milkshake_Pink_PCTG_spool.png?v=1793197610"},{"product_id":"salsa-red-pctg-prime","title":"Salsa Red PCTG Prime","description":"\u003cp\u003eSalsa Red PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":67701677261164,"sku":"CX15-1400-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Salsa_Red_PCTG_spool.png?v=1793197490"},{"product_id":"raspberry-pctg-prime","title":"Raspberry PCTG Prime","description":"\u003cp\u003eRaspberry PCTG Prime is a glycol-modified copolyester made from virgin resin, and it does not contain polycarbonate. It's easy to print and an upgrade from PETG for parts that need more strength, heat resistance or chemical resistance: functional prototypes, mechanical parts and jigs, automotive components, protective casings and covers, and containers and organizers.\u003c\/p\u003e\u003ch3\u003eKey properties\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignificantly higher impact strength than PETG, and ductile enough to bend under stress without fracturing\u003c\/li\u003e\n\u003cli\u003eResists oils, greases and solvents\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature up to 76°C (169°F), higher than standard PETG\u003c\/li\u003e\n\u003cli\u003eMore UV-resistant than PETG\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow shrinkage and warping, with good dimensional stability\u003c\/li\u003e\n\u003cli\u003eNo heated chamber required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase resin: virgin PCTG copolyester\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm (1.75 mm) · ±0.06 mm (2.85 mm)\u003c\/li\u003e\n\u003cli\u003eOther spool sizes available by request: \u003ca href=\"\/pages\/contact\"\u003econtact us\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eExtruded, quality controlled and shipped from one plant in Green Bay, WI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/print-parameters-coex-pctg\"\u003ePrint settings\u003c\/a\u003e · \u003ca href=\"\/pages\/filament-slicer-profiles\"\u003eSlicer profiles\u003c\/a\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":67701683683692,"sku":"CX15-1300-18-1KG","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/RaspberryPETGspool.png?v=1786562673"}],"url":"https:\/\/coex3d.com\/collections\/engineering-filament.oembed","provider":"COEX 3D","version":"1.0","type":"link"}